Remote Alarm or Reminder Call
     
 
The alarm of any extension can be set by the extension with programming capability (Refer Programming Manual for the same). This is done in same way as normal and reminder call, but only after inserting extension number on which reminder call is desired before time.
This can be done as follows,
Lift Handset and on getting system dial tone,

Dial  # 1 8 Ext A.M./P.M. HH MNT and hang up.

where,
Ext=Extension Number where alarm is desired.
AM=0/PM=1
HH=HOURS (2 digits must be used)
MNT=MINUTES (2 digits must be used)

The extension will ring at the appointed time. On lifting the receiver the user will hear music. HH stands for hours MM stands for minutes.

For example, if the alarm is to be set for 3.15 PM for extension 35 then

Dial   # 1 8 3 5 1 0 3 1 5 and hang up.

Note: In case the extension is in use at 3.15 PM the alarm will ring after you go on hook. MM should be rounded off to nearest 0 or 5 i.e. 3.13 to 3.15 and 3.12 to 3.10.

Setting of Reminder Call

This can be done as follows,
Lift Handset and on getting system dial tone,

Dial   # 1 8 Ext 2 MNT and hang up.

where,
Ext = Extension
MNT = MINUTES (2 digits must be used)

It is similar to alarm call but here instead of time one has to dial minutes from 01 to 99. The extension will ring after that time period is over from when the call was registered.

For example, If you want a reminder call after 30 minutes from now for extension 32,

Dial  #  1 8 3 2 2 3 0

 
Home    ||     Products     ||     Features     ||     Manuals     ||     Contact Us