This feature is optional and available with Security
Card attached to it, only. There are two Devices
you can control from PBX, one is in-built on feature
card from which device can draw current up to
2 Amp @ 230V AC, which can be enabled or disabled
as follows,
Dial
and hang up.
Where C=0/1 for
Off and On respectively.
When the Electric
Device is set as Door Opener no need to dial C.
The Door lock is opend for pre-determined programmed
time.
The other device
is optional, which comes along with ELCB by-pass
switch and is able control the electric device
up to 30 Amps e.g. Air conditioner, the operation
is similar as of first one and can be accessed
as follows,
Dial
and hang up.
where C=0/1 for Off and On respectively.
Note: Personnel Password
must be changed from
default to use this feature.
|
