SMDR Type of Call Recording
     
  This programming enables user to use SMDR buffer capacity effectively and enables user to avoid taking printouts frequently. This programming enables the user to register four type calls in SMDR buffer. First is all types of calls incoming or outgoing, second is all outgoing calls, third is all outgoing calls excluding non-High Pulse Rate Memory Calls and fourth option is recording of all outgoing High Pulse Rate Calls only. The High Pulse Rate Calls are those calls with starting digits that matches with High Pulse Rate Call table. This programming is bypassed when the time duration is programmed, as explained in next programming, when the duration exceeds this time for any type of call.
To program this, dial as follows,

Password + 4 6 0 T and hang up.

Where T is Type of Call
For T = 0 Record all calls incoming and outgoing
For T = 1 Record only outgoing calls
For T = 2 Record outgoing calls excluding non-High Pulse Rate memory calls
For T = 3 Record only High Pulse Rate Outgoing Calls

 

For example, to record only outgoing calls that too excluding memory calls, dial as follows,

Password +  4  6 0 2 and hang up.

Note: The memory calls here means global memory only and extension personnel memory is considered as a normally dialed calls only and will be registered as per the selection of the programming. STD Numbers in Global Memory will be considered as STD numbers and not as memory numbers. For STD numbers refer System Programming manual.

SMDR Call Recording Time Limit

This programming will bypass the option stated above. If the call exceeds the time limit programmed by this programming and the type of call was not programmed for recording, still the call timing will be recorded in the SMDR buffer.
To program this, dial as follows,

Password +  4 6 1 Minute and hang up.

Where, MNT = Minutes from 01 to 99. Mnt=00 is reset.

For example, the type of recording is set to only outgoing calls and user also wants to record the incoming calls lasting more than 5 minutes then program as follows,

Password +
  4 6 1 0 5 and hang up.

This will record incoming call timings, which are lasting more than 5 minutes.

   
Home    ||     Products     ||     Features     ||     Manuals     ||     Contact Us