|
This programming is required to define how many
and which microphones are connected to the system,
out of total available seven microphones for access.
This can be done as follows,
To
Enable or Disable all Microphone Dial as follows,
Password
+ 
and hang up.
To
Enable or Disable Particular Microphone Dial as
follows,
Password
+
and hang up.
Where,
* = All Microphones
N = Microphone Number
C = 0/1 Disable/Enable Microphone on System
For example,
three microphones are connected to the system
on port 1, 2, and 4 then program as follows,
Password
+
System Tone
System Tone
System Tone
and hang up
These Microphones
can be accessed by enabled extension or by DISA
call, using enabled extension password, by dialing
#61, #62 and #63 from local and 61, 62 and 64
from remote respectively.
Note: This
feature is available only with SAMEX Security
Card.
|
