|
The CLIP facility on extensions is to be activated
when CLID phones are connected to the extensions.
The CLID is given to extension irrespective of
CLID card connected to the system but the only
difference is that with CLID Card connected to
the system, user will get CLID on incoming calls
which are directly terminated or transferred to
extensions, from CLID enabled Trunk line, with
the same activated from P & T line, while
without CLID card the extensions will get CLID
of transferred calls for outgoing calls. The feature
can be programmed as follows,
Password
+
Where,
* for All extensions
Ext is Particular Extension
C = 0 or 1 is CLI Disable or Enable respectively.
For example, the extensions 34 and 35 are having
CLID phones are required for activation of this
feature then programme as follows,
Password+
Always enable this feature to extensions when
CLID phones are connected to that extensions or
the system resources are wasted and the ring cadence
for the first ring will be different. By default
all extensions are disabled for this feature.
|
