|
This feature enables the extension to configure
the system with appropriate password for system
and user setting, as well as activating remote
programming. All extensions will be enabled by
default setting and 30 will always be enabled
for programming apart from other extensions enabled
by programming this feature. To programme this
dial as follows,
Password
+
Where,
* for All extensions
Ext is Particular Extension
C = 0 or 1 is Programmin Disable or Enable respectively
by that Extension.
For example, the extensions 32 and 34 are required
to be programmed for programming capability apart
from extension 30 then programme as follows,
Password
+
BACK
|
