In addition to accessing trunk lines by dialing `0' and '9' it is also possible to access the trunk lines, directly by dialing the trunk numbers 27, 28 or 24, 25. The direct access can be given on selective basis as per individual extension and individual trunk line. The direct access will remain ineffective even '0' or '9' access is given to extensions and direct access can still be given to extensions even the trunk lines are in'0' or '9' group, but not for reserved incoming group trunk lines. To programme this dial as follows,

Password+  

Where, * for All extensions or All Trunk where applied
Ext is Particular Extension
Trk is Particular Trunk
C = 0 or 1 is Direct Access Disable or Enable respectively.

For example, if extension 35 is to be given direct access of trunk line 27 and 28 and extension 31 is to be given direct access facility for trunk line 29 in 308 system then programme as follows,

Password+ 

For 616 system do not programme as above, as here 35 extension will have access to 24, 25 and 26 lines as well, so programme individually for each trunks and each extensions. Now when extension 35 dials 27 or 28 and extension 31 dials 29, the extension user will get access to the respective line. By default all extensions are barred from using direct access.