| |
The barge-in feature is used to listen talks of
an extension with other extension or trunk, and
when an extension is barged-in conference is established.
Barge-in cannot be done to already existing conference.
The barge-in is level based and each extensions
can have one of the four levels. The call privacy
feature is absent only as the barge-in is level
based so executive users can have call privacy
always activated. The levels are 0-1-2 and 3,
level 0 extensions cannot barge-in to any body
but can be barged-in by level 1 and 2 extensions
users. The level-1 extensions users can barge-in
to level-0 extensions users without tone and level-1
extensions users with tone, but cannot barge-in
to level 2 and 3 extensions users. The level-2
extensions users can barge in to level 0 and 1
extensions users without tone, level-2 extensions
users with tone, but cannot barge in to level-3
extensions users. The level-2 users also have
privilege of different ringing pattern when they
call any other extensions. The level-3 is created
specifically for data and fax extensions, level-3
extensions cannot barge-in to anybody or cannot
be barged-in by anybody. This feature is programmed
as follows,
Password
+ 
Where,
* for All extensions
Ext is Particular Extension
C = 0/1/2 or 3 is Barge-in Level of the extension/s.
For example, if extension 35 (fax extension)
is to be kept at level-3, extensions 31 and 32
are executive extensions are to be kept at level-2,
extension 30 at level-1 and rest in level-0 then
programming is to be done as follows,
Password+
This will enable extensions 31 and 32 to barge-in
to anybody without tone, each other with tone
and 35 cannot be barged-in, with executive ring
cadence when they dial other extension numbers.
The extension 31 can barge-in to all extension
without tone except extensions 31, 32 and 35.
Always remember to programme * (for all extensions)
programming first and different extension specific
programming later, or the extension specific programming
will be overwritten.
|
|
