| |
Toll calling means making control on the outgoing
calls on the trunk lines when the system is operating
in day mode. Four different status conditions
can be programmed for each extension. To programme
this feature, dial as follows,
Password
+
Where,*
for All extensions,
Ext for Particular Extension,
C is Code 0 to 3 as follows,
C=0 All allowed,
C=1 Denied table numbers not allowed,
C=2 Restricted table numbers allowed,
C=3 Intercom and lower memory bank numbers are
allowed.
For example, to programme extension 30 for
all calls, 31 & 32 in denied mode and rest
all in intercom only, during day mode, dial as
follows,
Password+
Here, by * programming one can reduce programming
coding. Now extension 30 can dial all numbers
but user still have option to use dynamic locking
of extension, when not present on extension to
avoid misuse and at the same time can dial from
other extensions by using walk-in class of service.
The extensions 31 & 32 will be only allowed
to dial number whose starting digits are not in
denied table and the numbers in lower memory bank
as well in upper bank, but their digits not same
as denied table digits, they can still use dynamic
locking. While all other extensions are allowed
to use intercom and memory numbers in lower bank.
By default all extensions are allowed for all
calls.
|
|
