| |
This programme is used to disable 616 upper line
card, when removed from the system, while 616
CPU card is attached on main CPU card. As removal
of 616 CPU card will reset the system completely
and only line card is to be repaired or for up
gradation purpose, is to be removed from the system
this programming is to be done before removal.
In case this programming is not done and upper
line card is removed, keeping 616 CPU card, the
system will assume line card is connected and
abrupt functioning will occur. Once the upper
line card is connected, always enable it again.
To programme this dial as follows,
Password
+
Where, C is code, 0/1 for Out of service or In
service of 616 upper Line Card.
|
|
