| |
This table is used when STD detect is enabled
for the trunk line, with CLID facility activated
for that trunk, as the STD call from ring cadence
cannot be identified from first two ring cadence,
which are small in nature, and during that period
only the CLID number is issued on the trunk line,
so STD call is detected by this CLID Local number
table for comparison of STD call.
This table can be erased by programming as follows,
Password
+ 
This
will clear the table.
This
table can have ten codes, each of five digit length
maximum for local service providers starting numbers
as it comes on CLID Phones.
This can be programmed as follows,
Password
+
For
example, for Mumbai if programmer wants to store
local service providers numbers then programmer
is required to store numbers for MTNL, Private,
Cellular and WLL Operators which are 22 and 98
respectively. To store this programme as follows,
Password
+
This
will store this number in the table.
The calls coming with this starting numbers in
day mode will terminate normally or DISA mode,
if DISA enabled for the Trunk, and any other numbers
not starting with this digits will be considered
as STD numbers, if STD detect is enabled for the
trunk, and DISA, if DISA enabled for the Trunk,
will be bypassed and call will terminate as per
STD termination in Day mode with STD ring cadence.
In Night Mode DISA will be bypassed but the ringing
extension will be Night mode ringing extensions
only, while ring cadence will be STD cadence.
If the table is not programmed, all incoming calls
will be treated as Local calls only.
|
|
