| |
This table basically defines the starting dialling
codes Local, STD or ISD which are not permitted
for dialling out by extensions that are in denied
mode. The procedure for programming is same as
the restricted table except the following,
Password
+
Before
creating Restricted and Denied table always clear
the initial factory set table by 15* and 16*.
The initial factory set denied table is 0 &
95 while the restricted table is cleared. In this
condition the extensions put under denied table
will be denied S.T.D. and numbers starting with
digit `95' as per the factory set tables.
To clear the Denied table operate as follows,
Password
+
For
example, if you want all local calls to be
allowed and want to restrict STD, 95, Cellular
and WLL numbers to dialed from extensions 33,
34 and 37 then key in,
Password
+
Clears the table
This
will have, 98, 95, 94, 0, 5 and 3, in Denied table.
(Assuming 98,94 & 3 are Cellular and WLL operators
starting numbers). Now put extension 33, 34 and
37 in Denied Mode by using Day and Night Mode
Toll call control using 51 & 52 Coding respectively.
|
|
