| |
The
restricted table is created to allow STD/Local/ISD
on a selective basis, i.e. instead of full STD/ISD
dialling facility few selected STD/ISD dialling
will be allowed on these extensions. However,
that extensions should programmed separately for
restricted mode dialing in Day or Night mode.
To programme this operate as follows,
Password
+
Where
Area Code is the starting digits of local number
of the STD/ISD code.
The code can be max. 5 digits. Maximum of 26 codes
can be put in the restricted table. For programming
more than the one area code, you need not hang
up after feeding in the first area code. Instead,
do hook flash (HF) and continue the setting.
To clear
the restricted table operate as follows,
Password
+
This will clear
Restricted Table
For example, if you want
all local calls to be allowed and STD calls only
to Delhi, Madras and Calcutta then key in,
Here we have assumed that all local numbers in
your city start with any of the digits between
2 to 9 and the STD codes for Delhi, Madras &
Calcutta are 011, 044 & 033 respectively.
Maximum 26 area codes can be accepted. Each code
should not exceed 5 digits.
|
|
