| |
Auto
Night Mode
This mode is used when Day
and Night Mode
is required to be used for fixed timings during
a week. In this mode the user can set the time
of office hours along with the Lunch time. The
system will convert the operation to Night mode
after the office hours automatically, and will
change to Normal Mode at the time of opening of
the office. During Lunch Timing, if programmed,
the system will operate in Night mode, applicable
only for those days for which auto night mode
timing are set.
In case of Night Mode Ring requirement during
Day Time and Day mode Ring in Night time, program
evening time first and morning time second, this
will switch the system in Night mode during office
Hours and in Day mode during Night Hours.
Apart from this, the program coding allows programmer
to use wild code ('*') for setting and resetting
programming for all days or individual day.
In order to program this, Key in
For,
Auto Night Mode Reset,
This
will reset Auto-night mode with Lunch time.
For
Auto Night Mode Reset of a particular Day or Lunch
Where
0-6, for Sunday to Saturday respectively and 7
for Lunch time.
This will reset Auto-night mode for a particular
Day or Lunch time.
For
Auto Night Mode Time Programming of all Days
This
will program timing for auto day night mode for
all days except lunch time.
For
Auto Night Mode Time Programming of any Day or
Lunch time
This
will program timing for auto day night mode for
particular day or lunch time.
Where 0-6, for Sunday to Saturday respectively
and 7 for Lunch time. AM=0, PM=1, HH=Hours (01-12),
MNT=Minutes (00-59)
Examples
If
battery Back-up is not connected to the system
and power fails, then manual mode setting has
to be done, if switching time falls in between
programmed time. Manual setting will precede auto
setting after switchover time is skipped, till
next auto switching timing, and is also useful
for public holidays during the week. |
|
